Body, Trim & Glass Tools
Universal Windshield Wiper Arm Puller
A universal windshield wiper arm puller in carbon steel for removing stuck wiper arms, with a jaw opening of 9-43.8 mm and a net weight of 262 g.
PRODUCT RANGE
Automotive Repair, Specialty & Hand Tools
Explore seven categories of automotive repair, specialty and hand tools for distributors, importers and aftermarket brands, with wholesale, OEM & private label, and custom development support.
- CATEGORIES
- 7 core tool categories
- SOURCING
- Wholesale · OEM & Private Label
- CUSTOM DEVELOPMENT
- From drawings, samples or requirements
Product Categories
Browse the Range by Category
Seven categories covering the repair and maintenance jobs a workshop handles every day. Open a category to see the tools in that line.
Brake Service Tools
Caliper wind back kits, brake bleeder kits, brake line flaring tools, drum brake tool sets and brake cylinder hones.
Engine Service Tools
Cylinder hones, piston ring compressors, valve stem seal tools and belt tensioner wrenches.
Testing & Diagnostic Tools
Compression testers for petrol and diesel engines, cooling system pressure testers and circuit testers.
Oil & Fluid Service Tools
Oil filter wrenches, oil filter sockets and fluid filling and transfer tools.
Body, Trim & Glass Tools
Windshield and glass removal tools, trim and panel removal sets, and clip pliers.
Suspension, Steering & Bearing Tools
Coil spring compressors, ball joint separators, bearing pullers, press and pull sleeve kits and inner tie rod tools.
Automotive Specialty Hand Tools
Hose clamp pliers, CV boot clamp tools, thread repair kits, inspection mirrors and magnetic pick-up tools.
All products
55 products
View product
Testing & Diagnostic Tools
TU-443 Engine Fuel System Oil Pressure Tester
A TU-443 engine fuel system oil pressure tester with a 3.5-inch digital display measuring 0-140 PSI (0-10 bar), stated for petrol and diesel engines.
Engine Service Tools
15pcs Belt Tensioner Wrench Set
A 15-piece belt tensioner wrench set with a long curved wrench, a key, 5 pieces (E10, E12, E14, E16, E18) and 8 twelve-point pieces (12, 13, 14, 15, 16, 17, 18, 19 mm), in 42# CR-MO steel with nickel plating.
Brake Service Tools
1-1/8 in. Brake Cylinder Hone, 2-Claw
A 1-1/8 in. two-claw brake cylinder hone with a 3/4″ to 2″ (20-50 mm) capacity range, 28×6 mm stones and a knurled nut for adjustable honing tension.
Brake Service Tools
8-Piece Professional Drum Brake Tool Set
A drum brake tool set for brake spring service work, supplied in a blow molded case with a brake spring compressor, installer, removal tool, retaining spring tool, spring plier and two spoons.
Engine Service Tools
Valve Stem Seal Tool Set
A valve stem seal tool set for seal removal and installation on overhead camshaft engines, made of 45# carbon steel in sizes 5, 5.5, 6, 6.5, 7, 8 mm and 3/8″.
Automotive Specialty Hand Tools
2pcs CV Joint Clamp Banding Tool & Boot Clamp Pliers Set
A 2-piece CV joint clamp banding tool and ear-type boot clamp pliers set for banding up to 2/5-inch (10 mm) wide, covering fuel, cooling system and vacuum hose clips.
Suspension, Steering & Bearing Tools
Universal Bearing Puller
A universal bearing puller with six size specifications covering 2″ to 10″, made of heat-treated carbon steel with an electrophoresis surface finish.
Brake Service Tools
Brake Line Flaring Tool
A brake line flaring tool set for forming 45-degree single, double and bubble flares on steel and copper tube, with dies for 3/16″, 1/4″, 5/16″ and 3/8″ tubing.
Testing & Diagnostic Tools
28pcs Universal Radiator Pressure Tester Kit
A 28-piece universal radiator pressure tester and cooling system vacuum type tool kit for testing and maintaining vehicle cooling systems, including a vacuum purge and refill tool.
Suspension, Steering & Bearing Tools
Heavy Duty Coil Spring Compressor
A heavy duty coil spring compressor designed for MacPherson strut assemblies where space under the wheel arch is limited. Safety retaining pins are included. Capacity 2.5″–10.8″.
Suspension, Steering & Bearing Tools
Multi-Purpose Inner Tie Rod Tool
A multi-purpose inner tie rod tool made from 45# carbon steel with phosphating finish, for inner tie rod service with a capacity of 27–42 mm. 1/2″ drive. Weight 0.35 kg.
Page 4 of 5
Sourcing Options
Choose How You Want to Source
Most buyer programs follow one of these three routes. Tell us which fits and we can review the details from there.
01
Wholesale Supply
Source suitable tools from the existing range for distribution, retail and workshop supply. Send your item list and estimated quantities, and multiple categories can be reviewed in one quotation.
02
OEM & Private Label
For suitable existing models, logo, packaging, color and other branding requirements can be reviewed. Samples or specifications are confirmed before production where required.
03
ODM & Custom Development
Start from a drawing, sample, reference image or a new tool requirement. Feasibility, manufacturing options and the next development step are reviewed before quotation and sampling.
CUSTOM SOURCING & DEVELOPMENT
Have a Tool to Source or Develop?
Start with an existing tool, drawing, reference image, physical sample or a clear repair requirement. Tell us what you need and we'll review the most practical sourcing or development route.
connie_fang@coziness.cn
Phone / WhatsApp
+86 13857891035